Price includes the following:
*A Bryant Legacy 4 Ton 14 SEER Air Conditioner Model # 114CNA0480L0 or a Bryant Legacy 4 Ton 16 SEER Air Conditioner Model # 116BNA048000 depending on choice selection in the SEER dropdown.
*The following Bryant/Carrier Evaporator Coils (Vertical application only)
*Model # CNPVP4821ALA (21 inch wide/22.0625 inch high)
*One of the following Bryant Condensing Gas Furnaces (Vertical application only)
*Model # 915SB60100E21 (21 inch wide/35 inch tall, 95 % AFUE 100,000 btu input)
*Model # 926TB60100V21 (21 inch wide/35 inch tall, 96 % AFUE 100,000 btu input)
* We will choose one of the previously listed furnace models based on your selection made in the dropdown for AFUE
*Removal of old refrigerant from existing equipment (Refrigerant recovery)
*Removal and haul away of old air conditioner and related debris
*Removal and haul away of old evaporator coil and related debris
*Removal and haul away of olf furnace and related debris
*New 36x36 inch air conditioner pad
*Leveling ground for new 36x36 inch air conditioner pad
*Placement of New Bryant 4 ton air conditioner on new 36x36 inch air conditioner pad
*Copper refrigerant pipe connections right at the air conditioner and right at the evaporator coil using the existing lineset(refrigerant pipes).
*R11 flush to clean out old refrigerant and oils out of the existing lineset
*Copper refrigerant fittings needed to connect air conditioner and evaporator coil to existing lineset
*New black rubbatex insulation for suction pipe up to 6 feet at the air conditioner and up to 6 feet at the evaporator coil
*3/8 single direction filter drier
*Brazing by use of Oxy/Acetylene torch and low pressure nitrogen
*Nitrogen pressure test
*Evacuation by use of vacuum pump
*High and low voltage wiring connections at air conditioner
*High and low voltage wiring connections at the furnace
*Gas pipe connections at furnace
*Sheet metal duct transition at evaporator coil up to 1.5 feet in height only in accessible areas
*Silver taping at the top and bottom of the evaporator coil
*Silver taping at furnace/coil connection and furnace and return duct connection
*Silver taping duct joints for new duct transition or box if required to make transition or box
*Condensate drain piping for the evaporator coil and furnace using 3/4-inch pvc pipe and fittings up to 10 feet
*Reconnect flu pipe to new furnace
*Open service valves
*Add additional 410a refrigerant as needed to reach optimum subcooling and superheat levels
*PRICE INCLUDES INSTALLATION AND LABOR COST
*Price does not include new thermostat or labor to replace thermostat unless a thermostat has been selected in the thermostat option drop down at the top of this page.
4 Ton Bryant Legacy Air Conditioner, Evaporator Coil w/ Condensing Furnace
Drymount Air offers 1-3 day delivery and installation
Call us now to get our availability and to schedule delivery and installation!
We like emails too..